News

The most obvious difference between wholesale and retail purchases of outdoor hot tubs is the purchase quantity. Retail purchases are generally single-item purchases. Wholesale purchases, on the other hand, are typically characterized by large-scale operations. Purchase quantities can range from a few units, a dozen units, to dozens or even more.

Do not pour boiling water into an outdoor spa hot tub. The correct approach is to rely on the device's own heating system, optimized insulation, and proper control of water temperature changes to ensure the outdoor hot tub operates stably within a safe range.

High Total Alkalinity Leading to Continuously Rising pH In outdoor hot bath water quality management, total alkalinity (TA) is one of the key factors affecting pH stability. Many users only focus on pH test results, neglecting the important role of TA.

One of the easiest ways to check if your spa hot tub filter is clogged is by feeling if your massage jets' pressure has dropped significantly or if the water flow is not as strong as it normally is when you are activating the hydrotherapy jets.

If you find white particles, white spots, or hard deposits, use a mild descaler suitable for outdoor whirlpool hot tubs. Be sure to dilute the product according to the instructions to prevent high concentrations of chemicals from damaging the equipment.

Generally, it is recommended that the generator's rated output power exceed the whirlpool hot tub's continuous operating power by 25% to 50% to accommodate startup current demands and ensure operational stability.

LOVIA® has long specialized in the R&D and manufacturing of outdoor hot tubs and Swim Spas. Our product range spans from compact single-person spas to large-scale family and commercial units, offering a wide variety of seating layouts, sizes, and functional configurations.

The Most Common Reason for Automatic Start-up: Hot Tub Filter Circulation Program This is the real reason why the vast majority of users encounter automatic start-up. To maintain the cleanliness of the water in an outdoor hot water bath, the equipment needs to circulate and filter daily.

While yeast does thrive in warm, humid environments, modern outdoor hot tubs, if properly maintained, typically maintain a suitable concentration of disinfectants, such as chlorine or bromine, in the water. These disinfectants inhibit not only bacteria but also most microorganisms, including yeast.

Upon encountering this, many users initially suspect a defect in the spa hot tub shell or assume the acrylic surface is aging, wearing down, or delaminating. In reality, this "sandpaper feel" is rarely caused by the tub material itself; instead, it is usually the result of accumulated calcium scale.

First, check if the water level in the whirlpool hot tub is within the normal range. If the level is low, immediately add clean water and restart the massage system to see if the jets resume operation.

Circulation piping is the primary hiding place for biofilm. If one were to identify the location most prone to biofilm formation in an outdoor spa hot tub, circulation piping would undoubtedly rank first.