News

Smart control systems allow users to customize personalized spa settings according to their personal needs. For example, users can set specific massage programs such as gentle massage, deep relaxation or pulse massage, choose the appropriate water flow intensity and mode, and adjust the water temperature according to their preferences.

Outdoor spa jacuzzi low-temperature hydrotherapy generally refers to a hydrotherapy environment with a water temperature below 25℃, which is usually used in cold weather or for rapid cooling. Cryotherapy is usually performed in the form of cold water baths, ice water immersion, etc. This type of hydrotherapy has a long history in the health field.

Pros of a freestanding whirlpool bathtub: 1. Comfort and hydrotherapy effect 2. Aesthetic design and sense of space 3. Installation flexibility and space adaptability 4. Greater privacy and independence 5. Efficient thermal insulation performance 6. Stronger long-term value

The heater is one of the most critical components in winter maintenance. Check the working status of the heater every once in a while to ensure that it can maintain the water temperature normally. If the outdoor whirlpool hot tub heater is found to be unstable, it should be replaced or repaired in time.

Usually, turning counterclockwise will unlock the swim spa jacuzzi filter, but in some models, it may be clockwise. Therefore, carefully check your equipment manual to ensure the correct direction. If the filter is over-tightened or stuck, use moderate torque to slowly turn it, and never force it to avoid damaging the filter or the slot wall.

Large outdoor hot tubs are usually more than 2 meters long, about 2 meters wide and more than 0.9 meters high. This size is enough to accommodate more water and provide a comfortable space for multiple users. In contrast, small and medium-sized bathtubs are generally between 1.5 meters and 2 meters long.

Use an efficient filtration system The filtration system is the key to managing the water quality of a swim spa tub. An efficient filtration system can quickly remove impurities from the water, reduce the risk of water quality deterioration, and avoid the need to replace a large amount of water due to water quality problems.

Clean the nozzle and pipes Keeping the nozzle and pipes clean is the basis for ensuring strong water flow. Over time, scale, bacteria and other contaminants may accumulate inside the nozzle and pipes. These impurities will hinder the water flow and weaken the water flow of the outdoor whirlpool hot tub nozzle.

Without chlorine or other disinfectants, the number of bacteria and viruses in the water may increase rapidly. The growth of bacteria and viruses not only causes dirty water, but also poses health risks, especially when multiple people share an outdoor whirlpool hot tub, the risk of cross-infection increases significantly.

Generally, the length of a whirlpool hot tub for two people ranges from 150 to 200 cm. A 150 cm bathtub is suitable for a more compact space and can accommodate two people, but it may feel a little crowded. A 200 cm bathtub provides more space, allowing users to stretch their bodies more comfortably and enjoy a better relaxation effect.

Possible circuit overload If you plug a high-power device (such as an outdoor spa hot tub) directly into a regular outlet, it may cause the circuit to overload, causing power outages, tripping, or even electrical fires.

The bromine content in an outdoor spa hot tub exposed to direct sunlight may drop significantly within a few hours, or even disappear completely. Generally, the effect of UV rays will cause bromine to degrade within 4 to 8 hours.