News

Yes, but not the only reason. If the swim spa tub filter cartridge: • is clogged with grease and fine particles • the filter pores are filled with contaminants In this case, particles in the water will remain suspended, making the swim spa tub appear cloudy.

If your swim spa tub remains green after shock disinfection, the most common and fundamental reason is algae. Algae have the following characteristics: • They can multiply rapidly in warm, slow-moving environments • After being killed by disinfectants, they do not immediately "disappear" from the water

Globally, the high operating voltages for swim spas typically fall into two main ranges: • 220V–240V • 380V–415V (Three-phase power) The specific voltage chosen depends on the swim spa's power configuration, the number of pumps, the heating system's capacity, and its design specifications.

If the disinfectant concentration in a swim spa tub is insufficient, it will directly lead to: • Rapid proliferation of bacteria and microorganisms • The water turning white or appearing milky/cloudy • The appearance of fine suspended particles on the water's surface

There are two primary methods for removal: 1. Rotational Removal • Rotate the jet faceplate counter-clockwise. • Once rotated to the unlocked position, pull the jet straight out. 2. Press-and-Rotate Removal • Gently press the jet inward. • While pressing, rotate the jet to the unlocked position. • Release pressure to remove the jet.

You should refrain from entering a swim spa whenever you have open wounds on your body, including: •Deep cuts or lacerations. •Wounds that have not yet fully healed. •Surgical incisions. •Large areas of damaged or broken skin.

From a chemical standpoint, when baking soda dissolves in water, it: •Increases the water's alkalinity. •Neutralizes certain acidic components. •Exerts an upward adjusting effect on water with a low pH level. Therefore, in instances where the water in a swim spa tub becomes acidic, baking soda possesses a certain capacity for regulation.

According to the Aquatic Exercise Association, for young children and the elderly, the water temperature in a swim spa tub typically needs to be warmer—ranging between 84°F and 94°F—whereas for adults, a comfortable pool temperature usually falls between 85°F and 89°F.

The paving stone itself is indeed hard, but the problem lies not in the stone itself, but in: The paving stone system is not a monolithic, cast-in-place load-bearing structure. In contrast, swim spa tubs are better suited for placement on: • Continuous, monolithic structures • Seamless load-bearing surfaces • Foundations with predictable load-bearing capacity

One of the most common triggers for nausea in a swim spa tub is the effect of microorganisms or irritants in the water on the human body. If a person swallows, comes into contact with, or inhales water or mist contaminated with bacteria in a swim spa tub, the body may experience adverse reactions, and nausea is one common early symptom.

Feeling fatigue the day after swimming is a typical example of delayed onset muscle fatigue (DOMS). When exercising in a swim spa tub: • The water temperature is usually comfortable. • Buoyancy reduces pressure on joints and bones. • The enveloping feeling of the water reduces immediate pain signals.

A swim spa tub is not a single device that can only use hot or cold water. Contrary to popular belief, one of the core features of a swim spa tub is its adjustable water temperature. In other words: • It can be used for hot water • It can also be used for cold water • It can be set to a temperature range between hot and cold