News

Generally speaking, for a large, standard-sized outdoor spa jacuzzi tub (approximately 2.2 meters square), six to eight people are recommended for ground handling. For high-altitude installation or in complex terrain, this number should be increased to eight or more people, using a combination of lifting equipment and a sliding rail system.

One of the core components of a swim spa jacuzzi tub is the pump, responsible for moving water, circulating it within the tub, and driving the massage jets. A water pump generates some vibration during operation. If this vibration is not effectively absorbed or secured, it may cause noise.

For most outdoor spa jacuzzi filtration systems, it's generally recommended to replace the filter every one to two years. This recommendation is based on normal filter wear and usage. Under normal circumstances, the outdoor spa jacuzzi filter is flushed and filtered with each water cycle.

If your area has hard water, particularly high concentrations of calcium and magnesium ions, installing a water softener will help improve the lifespan of your spa jacuzzi tub and enhance the spa experience. If the water source in your area is soft or pure, installing a water softener may not be necessary.

The tub's plumbing system is a complex network through which water circulates. If the plumbing isn't cleaned promptly or the filtration system malfunctions during use, water can accumulate in the tub, breeding grounds for bacteria and mold.

A spa jacuzzi tub offers several benefits for the skin: 1. Promotes blood circulation and improves skin metabolism 2. Helps cleanse the skin and open pores 3. Relieves dry skin and maintains moisture 4. Relieves skin fatigue and relaxes the skin 5. Promotes skin repair and regeneration

For a home user, the actual cost of a daily hot water massage and regular maintenance is approximately $9 to $16 per day, a moderately affordable luxury experience. For commercial spaces or high-end spas, the cost of a single day's service can reach $136 to $232 per day, or even higher, due to increased labor, facility depreciation, and frequent cleaning.

The constant temperature, oxygen-rich, and circulating water in a spa jacuzzi tub creates an ideal breeding environment for bacteria, fungi, and algae. After forming a biofilm on the inner walls of the tubing, bacteria trap organic matter in the water and continue to reproduce, gradually accumulating into sludge.

Things not to do in a whirlpool spa jacuzzi tub include: 1. Do not swallow the water 2. Avoid use if you have health issues such as diarrhea 3. Do not allow children under 5 to use the hot tub 4. Do not consume alcohol before or while using the whirlpool spa jacuzzi tub 5. Shower before entering the tub

Chlorine is one of the most common spa jacuzzi tub disinfectants. It effectively kills bacteria, disinfects, and inhibits algae growth. Common forms of chlorine include calcium chloride (Ca(ClO)2) and trichloroisocyanuric acid (TCCA). The recommended dosage is 1-3 ppm per gallon of water. Generally, add as needed to maintain this range.

Water can be categorized as either soft or hard, depending on the degree of hardness. ·Hard water: Water has high concentrations of calcium and magnesium ions, typically exceeding 120 mg/L. ·Soft water: Water has low concentrations of calcium and magnesium ions, typically below 60 mg/L.

The main water flow modes can be categorized as follows: 1. Jet Stream Mode 2. Pulsating Massage Mode 3. Rotary Whirlpool Mode 4. Air Bubble Mode 5. Cascading Waterfall Mode 6. Cross-Flow Mode 7. Targeted Deep Tissue Mode