- Home
- >
News
It is not necessary to add chlorine daily, but it is necessary to monitor it daily. It is recommended to test the chlorine level daily and replenish chlorine when the value falls below 0.5 ppm, maintaining the free chlorine level between 1 and 3 ppm. If the water is only used a few times a week, the decision to add chlorine should be based on the actual water quality.
Studies have shown that an unshowered person entering a hot tub or luxury swim spa introduces an average of 1-2 grams of organic matter. While this amount may seem small, in a circulating heated environment, these substances quickly break down, creating odors, foam, and even a breeding ground for bacteria.
The answer is: not necessarily. For most homes, above-ground installation is the most common, safest, and most efficient option. It requires no excavation or waterproofing modifications. As long as the ground is flat and meets load-bearing standards (generally 500-800 kg/m²), it can be installed directly.
The answer is: with proper use and maintenance, it is not. Modern swim spas often have built-in intelligent temperature control modules that monitor water and ambient temperatures in real time. If the temperature approaches freezing, the system automatically enters "anti-freeze mode": • Activates the circulation pump; • Provides moderate heating; • Disables unnecessary energy consumption.
Family Swim Spa Tub (for 3–6 people) • Length: Approximately 4.0–5.5 meters • Width: 2.0–2.3 meters • Features: This is the most popular family model. Typically equipped with multiple massage nozzles, sitting and lying areas, and a swimming area, they can accommodate the entire family, making them an ideal choice for family leisure.
The chemical addition sequence should strictly adhere to these principles: 1. Adjust alkalinity first 2. Adjust pH second 3. Adjust hardness 4. Remove metals 5. Add stabilizer 6. Add disinfectant 7. Perform maintenance by shock treatment
The disinfecting efficiency of chlorine is closely related to the pH of the water. When the pH of a swim spa tub is low (<7.0), chlorine is more likely to form HOCl, but it also reacts more readily with other ions in the water. In an acidic environment, metal oxidation is more intense, resulting in more pronounced yellowing.
In some quiet neighborhoods, the noise of an outdoor swim spa tub operating in the evening or early morning may cause discomfort to nearby residents, especially if the noise persists for an extended period. If the noise is loud or occurs at night, it may lead to complaints from neighbors who may be disturbed by the noise.
Technically, swim spa tubs can be installed underground, but only if they meet a series of strict design, construction, and maintenance requirements. This installation method can improve overall aesthetics, spatial integration, and safety (especially for homes with children or elderly residents), but it also presents more engineering challenges.
Substances that should not be mixed with chlorine in swim spas include: 1. Acidic chemicals (e.g., dry acid, hydrochloric acid) 2. Ammonia-containing compounds (e.g., ammonia, certain detergents) 3. Other oxidizing or reducing agents (e.g., hydrogen peroxide, chlorine dioxide) 4. Grease (e.g., skincare, lotion, hairspray residue) 5. Dirt and high concentrations of organic matter (e.g., urine, sweat, cosmetic residue) 6. Metal ions (e.g., iron, copper, manganese) 7. Fragrance or coloring additives
Showering before and after using a swim spa tub is essential. The primary purpose of showering before use is to cleanse the skin. Showering immediately after use effectively removes any residual chemicals on the skin's surface, reducing irritation and allergic reactions.
A small rectangular swim spa tub is one of the most common sizes. For a bathtub approximately 2 meters in length, 1.5 meters in width, and 0.8 meters in depth, the required installation space is approximately: 2.6 meters x 2 meters, approximately 5 square meters. Considering the layout of the equipment and plumbing, the ideal installation space is 3 meters x 2.5 meters, approximately 7.5 square meters.