News

If the surface of the bath balls is too smooth or the design is unreasonable, they may be sucked into the spa hot tub filter under the push of the water flow, causing the filter to be blocked, thereby affecting the water purification function.

Generally speaking, the pump power range for small outdoor hot tubs is between 0.5 and 2 horsepower. The specific choice of pump power needs to be comprehensively considered based on the size of the bathtub, the number of massage nozzles, the intensity of the water flow, etc.

In many whirlpool hot tubs and spa equipment, "PR" generally refers to "Priming Mode", which is "drainage mode" or "starting mode". This is a special mode that the whirlpool hot tub automatically enters after the initial power-on or restart.

As a relatively fast-acting disinfectant, chlorine needs to be added frequently when used, while bromine has a relatively low maintenance frequency. Especially in terms of maintenance frequency and the application of automated equipment, bromine can provide outdoor spa hot tub users with an easier management experience.

The so-called jelly-like substance in the massage hot tub filter is usually called "biofilm". This sticky substance is a microbial aggregate, a gel-like structure formed by bacteria, fungi, algae and other microorganisms.

Regularly cleaning the interior of the outdoor garden hot tub, including removing grease, dirt and sediment, can effectively prevent water pollution. When cleaning, focus on cleaning the bathtub's nozzle, pipe system, filter and other parts to ensure that every detail is kept clean.

The water level of a round 2 person hot tub is usually set at 3/4 of the edge of the bathtub, that is, the height of the water surface from the edge of the bathtub is about 3/4 of the height of the bathtub.

The water pump is one of the core components of the whirlpool spa hot tub water flow system. If the water pump fails, it may cause the water flow to decrease. Common causes of pump failure include: ● Damage to the pump motor ● Wear of the pump's internal parts Pump power supply problem

Most outdoor spa hot tubs have a water level mark, usually on the inner wall or outside of the tub. This mark indicates the normal water level range of the tub. When the water level drops below this mark, it means that you need to refill.

Standard water capacity range Typically, a 6 person outdoor hot tub has a water capacity of between 300 and 475 gallons (about 1135 to 1800 liters). Larger tubs may hold more water, while tubs with compact designs may use less water.

Ultraviolet rays (UV) in sunlight also have a significant impact on the consumption of chlorine, especially in outdoor whirlpool hot tubs. UV rays can directly decompose chlorine in the water, converting it into harmless chlorides, causing the chlorine content to drop rapidly.

Using a liquid reagent kit Liquid reagent testing is a more accurate detection method than test strips. It determines the bromine content through chemical reactions and is suitable for spa hot tub users who want to get more accurate results.