News

The number of people that an outdoor spa hot tub can accommodate depends on its size, design and function. Small bathtubs are suitable for 1 to 2 people, medium bathtubs can accommodate 3 to 4 people, large bathtubs are suitable for 5 to 6 people, and extra-large bathtubs can even accommodate 7 people or more.

Turbid water is one of the most common water quality issues in whirlpool spa hot tubs. Typically, clear, transparent water is a sign of healthy water quality, while turbid water indicates that there is something wrong that needs to be addressed immediately. There are many reasons for turbid water, and here are some of the main reasons and their solutions.

According to conventional calculations, 1 gallon of water weighs approximately 8.34 pounds (about 3.78 kilograms). Therefore, we can easily calculate the total weight of 300 gallons of water: 300 gallons × 8.34 pounds/gallon = 2,502 pounds. This means that 300 gallons of water weigh approximately 2,502 pounds, or about 1,135 kilograms.

Most modern outdoor spa jacuzzi bathtubs have a multi-person design, which can accommodate multiple users at the same time, so it is completely feasible to use it with family and friends.

Hydrogen peroxide is available in a variety of concentrations, and the concentration commonly used in outdoor spa hot tubs is 35% food grade. This concentration can effectively kill bacteria without causing excessive irritation to the human body and the outdoor spa hot tub.

● For a 250-gallon spa massage bathtub, it is recommended to use about 2.5-5 ounces of chlorine-based shock agent. ● If the spa massage bathtub water quality is poor, or shocking has not been performed for a long time, the dosage can be appropriately increased to about 6 ounces.

Generally speaking, a good quality massage spa tub jet can last anywhere from 5 to 10 years with normal use and proper maintenance. This expected lifespan is mainly affected by factors such as manufacturing materials, frequency of use, water quality conditions, and maintenance level.

The total current demand of the outdoor spa hot tub can be estimated as the sum of the current of the heater, water pump and other electrical equipment. Assuming the heater is 4,000W, the water pump is 2,000W, and the other equipment is 500W, the current demand is: Itotal​=18.18+9.09+2.27≈29.54 amps (A)

The freezing point of water is 32°F (0°C). When the outside temperature is lower than this point, the water will gradually freeze. In the use of an outdoor spa hot tub, if the water stays in the pipe without sufficient flow or heating, the water in the spa hot tub pipe will begin to freeze when the temperature drops below 32°F.

If an outdoor spa hot tub is used frequently, especially when used by multiple people, the pollutants in the water will increase rapidly and the rate of ozone consumption will also increase. In this case, it is recommended to refill the spa hot tub with ozone every day.

Most outdoor spa bathtubs have an exhaust valve on the water pump. After turning off the power, gently loosen the exhaust valve of the pump to let the air in the pipe naturally discharge until you can no longer hear the sound of gas flowing out. Note that the water pump should not be running at this time to prevent the water pump from sucking in more air.

The main component of vinegar is acetic acid (acetic acid), which is usually a 5% concentration in water. Acetic acid is somewhat acidic, which means that it can effectively clean the surface of outdoor spa hot tubs by neutralizing alkaline substances or dissolving mineral accumulation.