News

Yes. Under the conditions of controlling concentration, time and temperature, hydrogen peroxide below 3% is one of the safe and usable disinfectants for acrylic spa tubs. Prohibited behaviors: ·Use of high concentration hydrogen peroxide above 30%; ·High temperature (>40°C) or long time (>1 hour) standing; ·Mixed with chlorine cleaners; ·Injected directly into the acrylic hot tub circulation system without dilution.

From a physiological mechanism point of view, it is possible to fall asleep briefly in a spa jacuzzi bathtub, but from a health and safety perspective, this is highly unrecommended. · Although relaxation helps calm emotions, you should avoid falling asleep uncontrollably; · The use time of the spa jacuzzi bathtub should be limited, and it is generally recommended to be controlled within 20-30 minutes.

· For a standard size (10x10 feet) concrete slab to support a whirlpool jacuzzi tub of normal capacity, a reasonable budget range is $1,500–$3,000; · If the project has complex structural requirements or is located in a high-cost area, the budget should be increased to more than $3,500.

Some studies have shown that activities in a hot environment after a meal may cause a greater burden on the digestive system, especially when entering an outdoor jacuzzi bathtub. The digestive process in the body conflicts with the relaxing effect of hydrotherapy, which may cause slow digestion and even nausea or vomiting.

Avoid overload and power damage General sockets in the home can generally only provide a maximum current of 10A (usually 220V voltage under Chinese standards), while the power requirements of most outdoor spa hot tubs far exceed this standard.

The steps and sequence of disassembling an outdoor spa hot tub are very important. Planning the disassembly sequence in advance can help avoid unnecessary disassembly steps and damage. Generally, the basic steps of the disassembly process include draining, removing electrical connections, removing water pipe connections, and removing the tub structure.

Outdoor spa jacuzzi is generally divided into two types of power types: 120V and 240V. 120V is the standard household power voltage for smaller power spa tubs, while 240V is suitable for more powerful spa systems and heating equipment.

Although installing a water purifier requires a certain amount of investment, in the long run, it can greatly reduce the maintenance cost of the swim spa jacuzzi.

The heater is a vital component in the whirlpool spa hot tub. If the heater itself fails or is damaged, the water temperature cannot be raised to the set value. Common heater failures include: ● Burned heating element ● Heater scale accumulation ● Heater circuit problem

Placing the freestanding whirlpool bathtub in the corner can prevent the bathtub from occupying a prominent position in the center of the bathroom. Corners are usually the more "private" areas in the bathroom.